In nearly all situations, most individuals spend quite a bit of money buying their lift truck. Thus, it is extremely essential to take good care of it in order to protect your investment well into the long run. It is really a great idea to know the procedures which are undertaken in the maintenance and care of this piece of machine.
One of the best ways to tell how good the engine is running is by starting the forklift up and listening closely to see how it runs. Like for instance, if there are any knocks or misses, the machine is faulty and this should raise some issues. Moreover listen carefully for any squealing noise that come from the belts as these noises would provide you with a lot of information.
When carrying out maintenance, some of the main components you would have to pay attention to comprise the safety warning devices, horn, the overhead guard, the lights and the gauges. Any burnt out light bulbs or faulty parts must be replaced as soon as they are noticed. It is also essential to inspect the wiring.
When the above parts have been inspected carefully, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Each cell of the battery has to be inspected so as to ensure the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the equipment and after that change the filters. The transmission filter, fuel filters and the hydraulic filter should be frequently replaced. Before fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
Once the oil change has been carried out and new filters have been fitted, visually check the drive axle from underneath the machine. Be sure to grease the axle if there is any grease fitting. Inspect the engine belts for any cracks or frays. If you find any, fix the problem accordingly. Then, check every other part of the machine like the wheels. If any type of problem or fault is detected, be certain to address it immediately in order to make certain the machine is running at its safest and optimum levels.