Utilize a Pneumatic Forklift
You could normally find pneumatic forklifts in warehouses and shipping operations. Also known as pallet trucks or pump trucks, they are used to transport things and materials around on wooden pallets utilizing metal forks mounted on a wheeled counterweight. The counterweight contains a pump that lifts the forks off the ground. A pallet truck is designed to be operated by a single individual.
Pallet trucks should be operated with care in order to avoid loss of control while lifting heavy loads. Equipment must be checked before operating. Clear the wheels area of any obstacle. Make certain that the handle could turn smoothly. The pallet must be stacked carefully in order to ensure that nothing would fall off during transportation.
On the end of the pallet truck's handle, squeeze the level located on the inside of the metal loop to release the air in the pump and lower the forks. The forks can then be pushed into the slots of the pallet. The forks should be at the center to be able to guarantee even distribution of the pallet's weight across them. Lift the forks from the ground by pumping the handle of the pneumatic lift until the pallet has cleared the ground completely. Do not raise the pallet very high or the forklift could unbalance.
Pull on the handle and then drag it behind you if you want to move the pallet. It is truly not safe to push the pallet in front of you as the momentum can cause it to go out of control. Take turns slowly and don't try to stop abruptly. Gradually stop, squeeze the lever, and the forks would lower to the ground. Finally, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent place.