Change a Propane Tank
Forklifts fueled by propane are common in warehouse settings. These forklifts have a propane mount situated at the back of the driver. These tanks need to be replaced periodically since they have limited lifespans. Forklift drivers should always utilize caution when handling propane tanks. Compressed gases are dangerous, especially since the gas is flammable. Use care when replacing and removing propane tank to prevent being injured.
1 If there is a need to change the propane tank, the first step is to stop the lift truck, then turn off the tank valve. The forklift should be left on until the engine dies. This procedure burns the gas off inside the transfer hose that connects the tank and the engine. Before taking the next steps, wear the proper safety equipment, like insulated gloves made of either leather or neoprene. It is very essential for you to protect your skin from touching the compressed gas, that is very cold.
2 The hose of the tank has to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reattach the holding straps and to reconnect the hose at the valve of the tank.
3 You can inspect for leaks by applying soapy water to the valve and slightly opening it. Leaking gas will cause bubbles to foam around the value. If this occurs, check the valve area and the connection hose at the nut. The connecting nut must be re-tightened if you detect any leaks in the valve area, and after that do the leak checking procedure once more. Persistent leaks mean that the nut and connecting hose must be replaced. However, if replacing the hose and nut still does not stop the leak, the tank should be replaced.
4 Open the valve all the way to enable the gas to fill the connecting hose. Then you can start the lift truck and continue operating.